PA6(尼龍6)B31SK/德國朗盛/物性表參數

日期：2020-04-25 02:37:27 編輯：科思德塑膠來源：科思德塑膠瀏覽：270

德國朗盛LANXESS Durethan PA6 B31SK是一種無鋼筋的,注塑尼龍6樹脂,根據特定的材料及所需等級，尼龍從環境中吸收潮氣的能力也不同。這與增塑劑的效果相同，即可以提高材料的斷裂伸長及韌性，但降低了材料的強度和剛度,除了自然色及黑色外，還可以提供一系列的不透明標準顏色；如有需要，也可以提供特定顏色的產品。
生產商：LANXESS(德國朗盛)、品名：Durethan
PA6(尼龍6)B31SK/德國朗盛/物性表參數

These property characteristics are taken from the CAMPUS plastics data bank and are based on the international catalogue of basic data for plastics according to ISO 10350.

Property		Test Condition	Unit	Standard	guide value
					d.a.m.	cond.
Rheological properties
	Melt volume-flow rate	260 °C; 5 kg	cm³/(10 min)	ISO 1133-1	110
	Molding shrinkage, parallel	150x105x3; 270 °C / WZ 80 °C; 400 bar	%	acc. ISO 2577	0.9
	Molding shrinkage, transverse	150x105x3; 270 °C / WZ 80 °C; 400 bar	%	acc. ISO 2577	1.1
	Post- shrinkage, parallel	150x105x3; 120 °C; 4 h	%	acc. ISO 2577	0.15
	Post- shrinkage, transverse	150x105x3; 120 °C; 4 h	%	acc. ISO 2577	0.15
Mechanical properties (23 °C/50 % r. h.)
	Tensile modulus	1 mm/min	MPa	ISO 527-1,-2	3500	1100
	Yield stress	50 mm/min	MPa	ISO 527-1,-2	85	50
	Yield strain	50 mm/min	%	ISO 527-1,-2	4.0	20
	Nominal strain at break	50 mm/min	%	ISO 527-1,-2	10	> 50
	Tensile creep modulus	1 h	MPa	ISO 899-1		900
	Tensile creep modulus	1000 h	MPa	ISO 899-1		700
	Charpy impact strength	23 °C	kJ/m²	ISO 179-1eU	N	N
	Charpy impact strength	-30 °C	kJ/m²	ISO 179-1eU	N	N
	Charpy notched impact strength	23 °C	kJ/m²	ISO 179-1eA	< 10	25
	Charpy notched impact strength	-30 °C	kJ/m²	ISO 179-1eA	< 10	< 10
	Charpy notched impact strength	-40 °C	kJ/m²	ISO 179-1eA	< 10	< 10
	Izod impact strength	23 °C	kJ/m²	ISO 180-1U	115	N
	Izod impact strength	-30 °C	kJ/m²	ISO 180-1U	116
	Izod notched impact strength	23 °C	kJ/m²	ISO 180-1A	< 10	25
	Izod notched impact strength	-30 °C	kJ/m²	ISO 180-1A	< 10	< 10
	Flexural modulus	2 mm/min	MPa	ISO 178-A	3000	900
	Flexural strength	2 mm/min	MPa	ISO 178-A	120	40
	Flexural strain at flexural strength	2 mm/min	%	ISO 178-A	6.0	8.0
	Flexural stress at 3.5 % strain	2 mm/min	MPa	ISO 178-A	100	30
	Puncture maximum force	23 °C	N	ISO 6603-2	6100
	Puncture maximum force	-30 °C	N	ISO 6603-2	6800
	Puncture energy	23 °C	J	ISO 6603-2	65
	Puncture energy	-30 °C	J	ISO 6603-2	70
	Ball indentation hardness		N/mm²	ISO 2039-1	150	55
Thermal properties
	Melting temperature	10 °C/min	°C	ISO 11357-1,-3	222
	Temperature of deflection under load	1.80 MPa	°C	ISO 75-1,-2	60
	Temperature of deflection under load	0.45 MPa	°C	ISO 75-1,-2	170
	Temperature of deflection under load	8.00 MPa	°C	ISO 75-1,-2	50
	Vicat softening temperature	50 N; 120 °C/h	°C	ISO 306	200
	Coefficient of linear thermal expansion, parallel	23 to 55 °C	10-4/K	ISO 11359-1,-2	0.7
	Coefficient of linear thermal expansion, transverse	23 to 55 °C	10-4/K	ISO 11359-1,-2	0.9
	Burning behavior UL 94	1.5 mm	Class	UL 94	V-2
	Burning behavior UL 94	0.4 mm	Class	UL 94	V-2
	Oxygen index	Method A	%	ISO 4589-2	25
	Glow wire test (GWFI)	2.0 mm	°C	IEC 60695-2-12	750
	Burning behavior US-FMVSS302	>=1.0 mm		ISO 3795	passed
	Vicat softening temperature	50 N; 50 °C/h	°C	ISO 306	200
Electrical properties (23 °C/50 % r. h.)
	Relative permittivity	100 Hz	-	IEC 60250	4.0	13
	Relative permittivity	1 MHz	-	IEC 60250	3.5	4.0
	Dissipation factor	100 Hz	10-4	IEC 60250	60	1900
	Dissipation factor	1 MHz	10-4	IEC 60250	200	1000
	Volume resistivity		Ohm·m	IEC 60093	1E13	1E10
	Surface resistivity		Ohm	IEC 60093	1E15	1E14
	Electric strength	1 mm	kV/mm	IEC 60243-1	30	30
	Comparative tracking index CTI	Solution A	Rating	IEC 60112	600
	Comparative tracking index CTI M	Solution B	Rating	IEC 60112	525 (450) M
Other properties (23 °C)
	Water absorption (Saturation value)	Water at 23 °C	%	ISO 62	10
	Water absorption (Equilibrium value)	23 °C; 50 % RH	%	ISO 62	3
	Density		kg/m³	ISO 1183	1140
	Bulk density		kg/m³	ISO 60	600
Processing conditions for test specimens
	Injection molding-Melt temperature		°C	ISO 294	270
	Injection molding-Mold temperature		°C	ISO 294	80
Processing recommendations
	Drying temperature dry air dryer		°C	-	80
	Drying time dry air dryer		h	-	2-6
	Residual moisture content		%	Acc. to Karl Fischer	0.03-0.12
	Melt temperature (Tmin - Tmax)		°C	-	260-280
	Mold temperature		°C	-	80-100

溫馨提示：
本物性表參數提供者不承擔任何法律責任，建議在選擇材料前，就數據值與塑膠材料廠商進行驗證。版權歸原作者所有，如有侵權請立即與我們聯系.

上一頁：PA6(尼龍6)B31FCS/德國朗盛/物性表參數 下一頁：PA6(尼龍6)B31SKH3.0/德國朗盛/物性表參數

返回首頁 返回物性參數列表

学长别揉了～流水了想要～,兽世的ηp小说,公交车伦流澡到高潮hnp电影,国产4k超高清智能电视哪个好

PA6(尼龍6)B31SK/德國朗盛/物性表參數

熱門文章

推薦文章